Parasound - NewClassic 275 v.2 Two Channel Power Amplifier

NewClassic 275 v.2 Two Channel Power Amplifier

Parasound NEWCLASSIC275V2
NewClassic Collection

Quick Specs

Type: Amplifier

This item has purchase restrictions.

We currently only offer this product for purchase within 150 miles of our store. Questions? Contact us for more information.

Enter Zip Code * For delivery options and item availability.

QTY

URL

by Parasound

Parasound NewClassic is a fresh interpretation of the classic designs that have earned top reviews and customer allegiance for over 25 years. NewClassic models deliver maximum "bang for the buck" performance and reliability.

View All

90 watts x 2 into 8 (all channels driven)
150 watts x 2 into 4 or 2 (all channels driven)
200 watts x 1 bridged into 8 or 4
20 amps peak current per channel
2 Ohm stable operation with load selector switch
Two pairs of speaker outputs with front panel A/B buttons
Rear-mounted lockout switch disables front A/B buttons
High pass filter, switchable for 20Hz or 40Hz
Automatic on/off by DC trigger with looping output
Automatic on/off by audio signal with 2 sensitivity settings
Fully discrete circuitry with high current toroid transformer
Bridging switch for stereo or mono operation
Efficient, low heat design
DC Servo and relay protection circuits
Rear-mounted left and right gain controls
Standby, channel status and high temperature indicators
Gold-plated RCA input jacks
Heavy duty 24k gold-plated 5-way speaker terminals
115/230v selector on rear panel
1U rack mount kit available separately (Model RMK11)

Power Output - (RMS power, 20 Hz - 20 kHz)	All Channels Driven 90 watts x 2, 8 150 watts x 2, 4 150 watts x 2, 2 (Load switch set to 2-3 )
Bridged Mono	200 watts x 1, 8 200 watts x 1, 4 (Load switch set to 2-3 )
Current Capacity	20 amps peak per channel
Frequency Response	20 Hz - 50 kHz, +0/-3 dB, 1 watt
Dynamic Headroom - 1.3 dB	Dynamic Headroom - 1.3 dB
Total Harmonic Distortion	0.35% at full rated output 0.025% at average listening levels
IM Distortion - 0.05 %	IM Distortion - 0.05 %
Transient IM Distortion - Not measurable	Transient IM Distortion - Not measurable
S/N Ratio	110 dB at rated output, IHF A-weighted 103 dB at rated output, unweighted 93 dB at 2.828 V output, IHF A-weighted 84 dB at 2.828 V output, unweighted
Input Impedance - 33 k	Input Impedance - 33 k
Input Sensitivity	800 mV for full rated output (28dB)
Inter-Channel Crosstalk	80 dB @1 kHz, 72 dB @10 kHz, 65 dB @ 20kHz
Damping Factor - Over 150 at 20Hz	Damping Factor - Over 150 at 20Hz
12V Trigger Turn On - DC 9 - 12V, 15 mA	12V Trigger Turn On - DC 9 - 12V, 15 mA
Audio Turn On	Quieter: 1 mV Louder: 6 mV
AC Power Requirement	110 - 120 V / 220 -240 V, 50 - 60 Hz 0.5 watts standby 25 watts Idle (no audio) 350 watts full output
Dimensions	17-1/4" Wide 16" Deep, with cables connected 2-1/2" High with feet, 1-3/4" panel only (1U) (437 x 406 x 63mm, 44.1 mm panel only)
Net Weight - 20 lbs (9.1 kg)	Net Weight - 20 lbs (9.1 kg)
Rack Mount Accessory	May be Purchased Separately RMK11

Quick Specs

Appearance
Type: Amplifier

275 v.2 Manual

Parasound Amp BTU Ratings

Get Adobe Reader

* Documents require Adobe Reader.

Extended warranties are usually very inexpensive and can save you thousands in the future. It's simple and inexpensive to purchase extended warranties and one of the smartest ways to protect your investment.

Electronics can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new electronics should they break tomorrow, don't buy a warranty. But if you're like most of us, protect yourself by purchasing inexpensive extended warranties when you buy a new product and save yourself big money in the long run.